There are four or five short sets of stairs and five or six floors in the stacked split level. The entrance is located on the center floor, between two floors. The entrance door leads into a foyer, and two short flights of stairs usually lead down to the basement and up to the living space (often the kitchen or the living room). At the bottom of the stairs is another set of stairs that goes up to the other three floors. So in total you have six floors plus one central floor with an entrance foyer.
The split level can be built in many different ways. The most common design has a main level that contains the majority of rooms and a lower level that functions as a garage or storage space. However, the upper levels can also be used as additional bedrooms or offices if desired.
The split level is very popular in the Midwest because it's easy to build and durable due to its flat roof design. Also, since there are no sharp corners, this house type is perfect for kids or elderly parents who may have problems handling heavy traffic or large parties.
In addition, a stacked split level can be built in almost any style including contemporary, colonial, ranch, craftsman, and more. Some builders even include special features such as fireplaces or sunrooms to make their houses feel more homey. Of all the house types, the stacked split level is probably the least expensive to build.
A normal split-level residence can have two or more storeys and is distinguished by a ground-level entry and short sets of stairs ascending to higher floors. A second set of stairs may lead from the front door to the top floor. A third set might rise from the basement to the first floor.
In general, the upper level is called the first floor, the next lower level the second floor, and so on. However, if there are no steps between the upper and lower levels, such as in a single-story home, then they would be referred to simply as the first floor and second floor, respectively.
The upper portion of a split-level home is usually the living room, which connects to the kitchen through a hallway. The bathroom typically occupies a separate area within the home, but it could also be part of the main living area if it has its own entrance. The lower level usually consists of a family room, laundry room, and possibly a bedroom or two. There may also be a utility or storage room on this level.
The split level is a common home design because of its ability to provide much-needed extra space for families who need more living area than a one-floor home allows.
Split-level house plans are often tri-level house designs that connect three levels of living space by a central stairway. Split-level house designs often have bedrooms on the upper level and a garage and family area on the lower floor plan level. These houses are great for families because they offer plenty of room for everyone to have their own space.
The main advantage of a split-level house design is that it allows for more privacy than a two-story house with one floor being used for living space and the other for sleeping. The upstairs rooms in a split-level house will also typically be smaller than those on a three-story house, which means less traffic through small spaces.
Also called "three-level" or "tri-level" houses, split-level plans usually contain four walls and a roof but only three floors. The bottom floor serves as a garage or basement, while the next floor up is where the living room is located. The third floor is usually set aside for bedrooms and bathrooms. A central staircase connects all three floors.
These are just some of the many advantages of a split-level house plan. If you're looking for a home that's spacious and comfortable, then you should consider this type of house design.
The first split-level house was built in 1847 in Boston, Massachusetts.
A split-level house is often divided into two pieces, one rectangular and one square. A split foyer is often a two-story rectangular house with an entry door and a tiny foyer between the two levels of living space. The term "split level" can also be used to describe houses with three or more floors - that is, they do not have just two levels. These higher number-of-floors buildings are usually described as "stepped" or "winged-attics".
The advantage of a split level design is that it allows for a large amount of living space on a relatively small amount of land. The disadvantage is that it can be difficult to find architects who will build them, due to lack of demand. Also, people may feel like they're living in separate houses when visiting friends in a split level home because there's no common area where they could hang out if they didn't want to spend time alone.
Split foyers typically have less living space than split levels, but they can be easier to maintain and decorate. There's also less risk of property values declining because they're less popular than split levels. However, they can be hard to sell because there's nothing special about them and so don't attract much interest from potential buyers.
A split-level floor plan combines the features of a classic ranch home and a multilevel home. A split-level house often includes three different sections, with a ranch-style main floor and stairs leading to separate functional levels with bedrooms, a huge garage, or extra living space. This type of house is easy to maintain because there are no bad rooms (such as basement or attic).
A multilevel house has two or more floors above ground level. It may have one open area with several rooms or it may have several enclosed areas connected by stairways. The choice between these types of houses depends on how much space you need and your budget. Multilevel homes can be easier to heat than split-level homes because they have more surface area exposed to the elements. However, they can also be harder to cool down in the summer due to all the interior doors that must be opened to escape to the outside.
Multistory buildings are also called tall buildings or high-rise apartments. These structures use up a large amount of land and are expensive to build. They usually have only one roof level but sometimes have additional floors added on later. Examples of multistory buildings include skyscrapers, apartment buildings, and townhouses.
Tall buildings can be easier to heat than smaller ones because they have more surface area exposed to the elements.